TS590s intermittent receive
- Details
- Hits: 21072
Since the beginning, my brand new TS590s had a intermittent problem. The reception was fading and sometimes disappeared completely. Sometimes, the TX went away and at the same time, the HI/SHIFT setting didn't work above 3000 Hz.
I noticed that a slight shock on the case brought the rig back to live, but not always. Being new and under warranty, i sent the rig back for repair.
SO-3 TCXO substitution
- Details
- Hits: 42713
One of the first things that bothered me with my brand new TS590s was a noticeable fequency drift at startup. I was quite surprised to learn that the master clock of the TS590s uses a normal Xtal oscillator at 15.600 MHz.
As a solution, Kenwood is "offering" an optional TCXO, named SO-3. It was another shock when i saw the retail price for a new SO-3. It costs a heavy 130 € in France while a new TS590s can be found around 1500-1600 €...
Nowadays, in all serious rigs a TCXO is a MUST with the growth of digital modes. In mass production, it only costs a very few €uros. I'm convinced that the price of the TS590s wouldn't be higher (or even cheaper) if Kenwood would replace the original Xtal oscillator + the TCXO addon board + 2 jumpers + the 2 connectors + screws, etc... with a TCXO !
But that's certainly a way for Kenwood to make an easy money by selling their optional SO-3 TCXO !
Moreover, the customer has to solder the TCXO on the addon board he has to remove from the transceiver. RIDICULOUS !!
PIC tone decoder
- Details
- Hits: 36647
Here is a description of an audio frequency tone decoder build around a PIC 12F683.
For a cost not much higher than a basic NE567, you will have :
- A more efficient decoder
- Far better stabiliy
- A settable threshold with hystereis
- Possibility to tune from 100 to 2148 Hz or use a fixed frequency
- No exotic or particular component
16 LED bargraph.
- Details
- Hits: 23712
In one of my projects, i wanted to use 2 LED bargraphs.
The classical way to do that is to use a IC made for that, the LM3914. This circuit has been build to drive 10 LEDs which are generaly in a single module.
10 LEDs wasn't quite enough for my usage, i wanted more diodes for more "precision". I also wanted to mix diode colours, what is not easy to do with diode modules.
The LM3914 can be chained to drive more LEDs, but price is getting higher...
My first thought was to use 20 LEDs, the first one being green, than orange and finaly red to display an overdrive or a danger.
The picture shows the first pcb made and only a few LEDs wired for testing !
Page 7 of 7
- Kazançlı bir başlangıç yapmak için deneme bonusu sunan bu siteye göz atabilirsiniz.
- Fırsatlarla dolu deneme bonusu veren siteler arasında öne çıkan bir seçenek burada.
- Yeni üyeler için özel bonus veren siteler, avantajlı teklifleriyle dikkat çekiyor.
- Kullanıcı memnuniyetine odaklanan bonus veren siteler, eşsiz fırsatlar sunuyor.
- Güvenilir bir deneyim için deneme bonusu veren siteler, kazanç kapınızı aralıyor.
- Hızlı kazanç fırsatı sağlayan deneme bonusu seçeneklerini keşfedin.
- Avantajlı teklifleriyle deneme bonusu veren siteler, yüksek kazanç imkanı sunuyor.